Topkit 12Ton Tower Crane Hammer Head
![](/template/images/loader.gif)
- ZCJJ
- China
- 45DAYS
- 4 units
has the advantages of less total installation time, lower requirements for installation equipment, reduction of the weight of each tower crane and the use of smaller tower section and chassis.
Description Specification
12Ton Hammer Head Topkit Tower Crane ,
Model:TC7032 ,
Jib length: 70m
Max load: 12Ton
Tip load: 3.0Ton
Mast type: 2m , L68B2 Mast Section
Type, Stationary , Inter Climbing , Travelling.
12Ton Hammer Head Topkit Tower Crane ,
Tower Crane Knowledge sharing:
Tower crane jacking jitter and noise is larger, what is the cause?
Tower crane operators should have a solid technical knowledge of the tower crane, and timely carry out the maintenance and maintenance of the tower crane, only the personnel and mechanical two aspects at the same time, to ensure that the occurrence of tower crane accidents.
Fault analysis and treatment of tower crane jacking vibration and noise
Topkit Tower Crane ,
1. Fault reaso air is mixed in the hydraulic system.
Solution exhaust.
1. Fault cause empty oil pump.
Solution go for it.
1. Fault reason mechanical mechanism and hydraulic cylinder are too tight.
Solution maintenance, replacement.
1. Fault cause internal leakage in the system or oil seal damage.
Solution test or change the oil seal.
Hammer Head Tower Crane
1. Fault cause deterioration of hydraulic oil.
Solution replace the hydraulic oil.Discussion on the power supply mode and protective measures of tower crane and the function of emergency stop button
Topkit Tower Crane ,