Derrick Crane 2Ton
- ZCJJ
- China
- Stock
- 2 units
The roof crane drawings, advanced technology, for the production of the production drawings, drawings complete, through the actual use of verification to reach the domestic advanced level
Description Specification
2Ton Derrick Crane Tower Crane
Model: TCD2420 ,2Ton
Jib length: 14m
Max load: 2Ton
Tip load: 1.0Ton
Type, Stationary
2Ton Derrick Crane Tower Crane
Tower Crane Knowledge sharing:
Fixed attachment tower crane installation
1. Fixed base section
Load the four load-bearing plates into the pre-embedded ground anchor bolts, and adjust the four load-bearing plates to a horizontal plane by adjusting the nuts. Under the bearing plate, insert steel pads of required thickness to lift the fixed foundation joints onto the bearing plate and fix them with nuts.
Derrick Crane
2. under the tower, climbing frame, rotary part, the installation of the tower, the balance arm assembly, hoisting, lifting beam assembly, luffing wire rope wear around, balance weight block the first block of hoisting, lifting beam, the installation of lifting beam bars, the balance weight lifting, hoisting wire rope wear around, electrical system installation and debugging, inspection and test run, the tower installation standard section can be found in the QTZ63 tower crane operation instruction.
Derrick Crane
3. Installation of attachment rack
(1) the attachment rack should be installed at the position between the upper and lower 100mm of the horizontal web pole.
(2) the vertical degree of the tower can be adjusted to be no more than 1/1000 by using the adjustment bolts of the attachment frame.
Derrick Crane