Derrick Crane 8Ton
- ZCJJ
- China
- Stock
- 8 units
Performance parameters and installation method of roof crane structure
Description Specification
8Ton Derrick Crane Tower Crane, Roof crane
Model:TCD2420 ,8Ton
Jib length: 24m
Max load: 8Ton
Tip load: 2.0Ton
Type, Stationary
8Ton Derrick Crane Tower Crane, Roof crane
Tower Crane Knowledge sharing:
Fault analysis and solution of tower crane tripping
Tower crane work often trip fault reasons | Tower crane work often trip solution |
Leakage screen operates by mistake | Review leakage current maintainers |
Short circuit and grounding | Troubleshoot the lines. Fix them |
The working power supply voltage is too low or the voltage drop is large | Measure the voltage and stop working |
8Ton Derrick Crane Tower Crane, Roof crane
Tower crane lifting height limit device, tower crane rotation limit device
the following discussion tower crane lifting height limit device, the role of the tower crane rotation limit device.
Lifting height limiter
Lifting height limiter is used to avoid possible errors in control. In order to avoid damaging the crane boom structure during lifting, the steel wire rope on the drum is prevented to be completely loose or even wrap around the drum in the opposite direction when descending.
For the tower crane with movable arm type amplitude variation, the lifting height limiter is usually composed of a touch rod, a lever, a spring and a travel switch, which is usually fixed at the end of the lifting arm. The hammer is connected to the lever of the terminal switch through the hook ring and the wire rope of the limiter. When the hammer is in a deformed position, the terminal switch contact is closed.
8Ton Derrick Crane Tower Crane, Roof crane
If the lifting hook picks up, holds the heavy hammer and continues to rise slightly to get rid of the gravity effect of the heavy hammer, then the lever of the terminal switch moves an Angle under the action of the spring, which makes the lifting mechanism control loop contact disconnect and stops the lifting hook.
For the jack-up tower crane with the boom of the trolley amplitude, the lifting height limiter is individually installed at the end of the drum shaft of the lifting mechanism. The multi-function limiter is composed of a transmission system (reducer mounting) and a travel switch. The limiter is mounted on one end of the drum and driven directly by the drum, or driven by the gear ring and pinion teeth fixed on the drum.
Turn limit device
The most commonly used rotary limiter is composed of a limit switch and a pinion with a reducer. The limiter is fixed on the structure of the rotary support of the tower crane.
When the upper part of the tower crane is moved by the turning mechanism, the small gear of the rotary limiter is driven to roll through the large ring of teeth, and the number of rotation cycles of the tower crane is recorded. The reducer of the limiter drives the CAM, and the convex block on the CAM presses down the micro switch, thus blocking the corresponding rotary control loop and ending the rotary activity.
Roof crane