L68B3 Mast Section Attention to hoist
1. In the operation, the driver and Signalman must maintain good visibility with the lifting material. The driver and the Signalman should work closely together and obey the unified command of the signal.
2. In case of power failure during operation, the power supply should be cut off and the lifting material should be lowered to the ground.
3. High temperature objects must not be directly suspended, and protective plates must be added to angular objects.
4. During the use process, the used wire ropes should be constantly checked and the scrap standards should be immediately scrapped
5. The wire rope on the coil should be arranged neatly. If overlapping and oblique winding are found, the cable should be rearranged. It is strictly forbidden to step on the wire rope with hands and feet in rotation. The wire rope must not be fully released. At least three laps should be retained
6. The wire rope shall not be knotted or twisted. It shall be replaced when the break in a pitch exceeds 10 %.
L68B3 Mast Section L68B3 mast section is the best in this field