L48A1 Mast Section Building the foundation of tower crane is an important guarantee for safe construction
Tower crane is an important lifting equipment on the construction site. It is widely used and plays an important role in transportation, logistics and other industries. Many tower crane accidents are caused by tower crane tipping, which shows that the foundation of tower crane is an important guarantee to ensure the safety of construction.
L48A1 Mast Section：
http://www.towercranesupply.com/product/l48a1-mast-section-for-tower-crane-masts
In order to rush to the construction period, some of the construction sites are installed hastily when the concrete strength is not enough, so that the load-bearing of the tower crane exceeds the ground stress limit, which leads to the unfortunate event of collapse and overturning;
In some construction units, the excavation work near the tower crane foundation leads to landslide and even displacement, which leads to tower crane accidents;
In recent years, many cities in China have produced groundwater funnel due to excessive groundwater extraction, which leads to uneven settlement and affects the operation and construction of tower crane.
Therefore, in order to prevent the occurrence of these tower crane accidents, the construction unit must ensure that the ground endurance meets the design requirements when building the tower crane foundation, and the strength of reinforced concrete shall be at least 80% of the design value. For the tower crane foundation with basement engineering, special treatment measures shall be taken: for example, pile driving under the foundation, and the reinforcement at the pile end shall be firmly welded with the foundation anchor bolt. The bottom of the concrete foundation shall be flat and compacted, and the bottom of the foundation shall not be made into a pot.
The foundation anchor bolt size error must be constructed in strict accordance with the requirements of the foundation drawing. The anchor bolt shall be kept enough exposed to the ground, and each anchor bolt shall be pre tightened with double nuts. Before installation, the foundation surface shall be treated to ensure that the levelness of the foundation cannot exceed 1 / 1000. At the same time, the tower crane foundation shall not accumulate water, which will cause uneven settlement of the tower crane foundation. No pit or trench shall be dug at will near the tower crane foundation.
L48A1 Mast Section：
http://www.towercranesupply.com/product/l48a1-mast-section-for-tower-crane-masts
