290HC Mast SectionHow far should the tower crane keep away from the building
for General Tower Crane, the single side width of climbing frame is 1.7 m, the outer frame range is generally: 0.2 m from the wall + 1 m by frame + 1 m by exposed horizontal Bar 0.1 m 1.3 m, 3.0 m total, 0.6 m total if the operation room is located on the side of the building, 3.6 m total, and 3.8 m if the safety zone is 0.2 m.
290HC mast section is the best in this field
According to the specific type of tower crane. If the length of the short distance wall is reduced, the width of the outer frame can be reduced, the operator's room can be moved to the non-wall side when the tower crane is arranged, etc. . It should be shortened to 3.0 meters, however, at this point, the foundation of the tower crane may need to be taken as a whole with the structural foundation.
290HC mast section is the best in this field
